Year: 2018

Posted on by

MPPS Update V22.0.5.22

Added Opel Vivaro EDC16 to the Database.
Added CRD3.1 checksum to MPPS.
Added PSA/Ford DCM3.5 eeprom R/W.
Added PSA DCM 3.4 R/W/Cks.
Added Smart ME7.7.0 EEprom boot mode.

VAG ME7.5 – Special mode added R/W/Cks Kline
VAG ME7.5 – Special mode added R/W/Cks Eeprom Kline
VAG MEDC17 drives will now show if the ecu has been OBD unlocked.

Updated Volvo ME7 checksum both internal and external.
Corrected Volvo ME7 comms problem.
Corrected Volvo EDC15C11 comms problem.
Updated Bosch checksum to do dual boot files.
Updated Mercedes ME2.8 seed key.

Posted on by

AMT BDM

AMT BDM is a universal BDM programmer for ECUs using the Motorola MPC5xx processor.

The software automatically detects the processor and memory types, which simplifies the process for the user. Access to the available memories is then granted, the software allows you to individually read / write the desired data.

Included with the AMT BDM programmer are the following probes:

  • BDM1 – 10 pin Siemens probe (port pitch 1.27mm) – Siemens SID201, SID202, SID203, SID204, SID206, SID803, MS45, MSS65, MSV70, MSS70. Bosch ME9.7, EDC7.
  • BDM2 – 10 pin Delphi probe (port pitch 2.54mm) – Jaguar/Ford 2.0TDCI.
  • BDM3 – 14 pin Bosch probe (port pitch 2.54mm) – All Bosch.
  • BDM4 – 10 pin Siemens/Marelli probe (port pitch 1.27mm) – Marelli, Siemens PPD, Siemens MSS65.
  • BDM7 – 10 pin Delphi probe (port pitch 2.54mm) – Mercedes Benz / Kia / Ssangyong Delphi DCM3.2.

This tool is available as a master only. Checksums are not included, so you will require a third party checksum program or MPPS users can use the checksum utility available in the MPPS software (where supported).

Buy Now