Author: AMT

Categories
Software Updates

MPPS Update V22.4.2.11

  • 24/11/2022 Enabled special function for all tools: Utility for creating OBD unlock files from VAS flash file containers (flash containers are not provided).
  • 24/11/2022 All tools now support FRF/SGO file flashing!
  • 24/11/2022 There have been lots of other small updates.

This update only works for users with the latest MPPS interface (from SN 43xxxxxx > onwards)
Older hardware 41/42xxxxxx is no longer supported.

Categories
Software Updates

AMT BST Update V1.0.6.6

 

  • Bench mode: Bosch EDC16 ECUs based on Motorola MPC5xx microprocessor. Read/Write Int/Ext Flash + EEprom. Flash checksum correction included.

  • Bench mode: Bosch VAG MED9 based on Motorola MPC5xx microprocessor. Read/Write Int/Ext Flash + EEprom. Flash checksum correction included. (Other brands using ME(D)9 will be added in future release)

  • Connection manual format revised, now split into separated pdf per ECU type.

Categories
Software Updates

MPPS Update V22.11

  • 04/12/2020 Added new FRF decryption in Tricore Boot.
  • 04/12/2020 Added PSA ME7.4.9 Kline Special.
  • 04/12/2020 Added new antituning search for EDC17 ecu’s.
  • 04/12/2020 Updated (M)EDC17 checksum in Tricore boot.
  • 04/12/2020 There have been lots of other small updates.

This update only works for users with the latest MPPS interface (from SN 43xxxxxx > onwards)
Older hardware 41/42xxxxxx is no longer supported.

Categories
Products

AMT BST

AMT BST is a universal bench service tool.

The software automatically detects the ecu and memory types, which simplifies the process for the user. Access to the available memories is then granted, the software allows you to individually read / write the desired data.

AMT BST currently supports:

  • Bench mode: Bosch MEDC17 based on TriCore microprocessor.

  • Bench mode: Bosch MDG1 based on Motorola MPC5777 / Aurix TC2xx microprocessor

  • Bench mode: Bosch EDC16 based on Motorola MPC5xx microprocessor.

  • Bench mode: VAG MED9 based on Motorola MPC5xx microprocessor (Other brands using ME(D)9 currently not supported, will be added in future release)

This tool is available as a master only. Flash checksums are included!

Buy Now

Categories
Software Updates

MPPS Update V22.2.1.3

update_clean

  • Added new FRF decryption in Tricore Boot.
  • Added PSA ME7.4.5 K-line Can and Special mode.
  • Added Opel Vauxhall ME9.6.
  • Added Renault Delphi DCM 1.2 Can.
  • Added VAG Simos 6.
  • Corrected a problem with Delphi E87 checksum.
  • Added new antituning search for EDC17 ecu’s.
  • Added (M)EDC17 Slave ecu’s both TP2 and UDS.
  • Various corrections and fixes.

This update only works for users with the latest MPPS interface (from SN 43xxxxxx > onwards)
Older hardware 41/42xxxxxx is no longer supported.

Categories
Software Updates

MPPS Update V22.0.5.22

update_clean

Added Opel Vivaro EDC16 to the Database.
Added CRD3.1 checksum to MPPS.
Added PSA/Ford DCM3.5 eeprom R/W.
Added PSA DCM 3.4 R/W/Cks.
Added Smart ME7.7.0 EEprom boot mode.

VAG ME7.5 – Special mode added R/W/Cks Kline
VAG ME7.5 – Special mode added R/W/Cks Eeprom Kline
VAG MEDC17 drives will now show if the ecu has been OBD unlocked.

Updated Volvo ME7 checksum both internal and external.
Corrected Volvo ME7 comms problem.
Corrected Volvo EDC15C11 comms problem.
Updated Bosch checksum to do dual boot files.
Updated Mercedes ME2.8 seed key.

This update only works for users with the latest MPPS interface (from SN 43xxxxxx > onwards)
Older hardware 41/42xxxxxx is no longer supported.

Categories
Products

AMT BDM

AMT BDM is a universal BDM programmer for ECUs using the Motorola MPC5xx processor.

The software automatically detects the processor and memory types, which simplifies the process for the user. Access to the available memories is then granted, the software allows you to individually read / write the desired data.

Included with the AMT BDM programmer are the following probes:

  • BDM1 – 10 pin Siemens probe (port pitch 1.27mm) – Siemens SID201, SID202, SID203, SID204, SID206, SID803, MS45, MSS65, MSV70, MSS70. Bosch ME9.7, EDC7.
  • BDM2 – 10 pin Delphi probe (port pitch 2.54mm) – Jaguar/Ford 2.0TDCI.
  • BDM3 – 14 pin Bosch probe (port pitch 2.54mm) – All Bosch.
  • BDM4 – 10 pin Siemens/Marelli probe (port pitch 1.27mm) – Marelli, Siemens PPD, Siemens MSS65.
  • BDM7 – 10 pin Delphi probe (port pitch 2.54mm) – Mercedes Benz / Kia / Ssangyong Delphi DCM3.2.

This tool is available as a master only. Checksums are not included, so you will require a third party checksum program or MPPS users can use the checksum utility available in the MPPS software (where supported).

Buy Now

Categories
Software Updates

MPPS Update V22.0.2.14

  • Added VAG Delphi DCM 3.7 R/W/Cks (Including OBD unlock)
  • Added Renault SID 309/310 to Password Tricore boot
  • Added Ford SID 209 to Password Tricore boot
  • Added Renault SID307/309/310 Password to MPPS (Tricore users only).
  • SID 307 password can only be read in the car.
  • Added new functions to MPPS (Tricore users only)
  • Added a new version to Range Rover SID 204
  • Added Mitsubishi EDC16C39 R/W/Cks (Beta drive for now have been unable to test)
  • Added A new function to remember passwords once they have been used. This is to avoid loading passwords after every mod.

 

 

This update only works for users with the latest MPPS interface (from SN 43xxxxxx > onwards)
Older hardware 41/42xxxxxx is no longer supported.

Categories
Software Updates

MPPS Update V22.0.0.10

update_clean

  • Added more SGO to Unlock files
  • Added new checksum algo to Tricore boot
  • Added Volvo ME9.0 UDS ecu
  • Added Marelli 9DF R/W/Cks OBD
  • Added Marelli 9DF Boot mode
  • Added Marelli 8Fx Boot mode
  • Added Delphi (PSA/Ford) DCM3.5 Boot mode
  • Added Delphi (Mercedes) DCM3.5 Boot mode
  • Added Delphi Opel E87 R/W/Cks
  • Added Delphi DCM3.4 Renault R/W/Cks
  • Added Ford SID 807Evo password in Tricore boot

 

 

This update only works for users with the latest MPPS interface (from SN 43xxxxxx > onwards)
Older hardware 41/42xxxxxx is no longer supported.

Categories
Software Updates

MPPS Update V21.2.5.3

update_clean

  • Added more Sgo to Unlock files
  • Added more checksum algos to Tricore boot
  • Added Marelli 8DF Eeprom read\Write
  • Added Marelli 9DF Eeprom read\Write
  • Added Volvo Denso ECU
  • Hot fixes for drives for VAG ecu’s

 

 

This update only works for users with the latest MPPS interface (from SN 43xxxxxx > onwards)
Older hardware 41/42xxxxxx is no longer supported.