Posted on

MPPS Update V18.9.8.6

This version has been completely rewritten for Windows 10 support.

There is now a new download manager which will be used for hot fixes as well as full updates.
You can now right click the ECU info window and save the contents to disk.

OBD:

  • Opel Denso Hybrid ecu on Corsa. R/W/Cks
  • Opel Denso upto 2010 (2010-on already supported) R/W/Cks
  • Ford SID803 R/W/Cks

Tricore Boot:

Added new processors

  • TC1724/28
  • TC1782/84
  • TC1791/93/98
  • New password reading protocols added.

Support for the latest password protected ECU’s (eg. BMW F-series) will require some extra hardware, which is in development.

Corrections:

  • Some minor problems with EDC17 CAN ECU’s
  • A problem with PSA SID803A
Posted on

MPPS Update V18.7.7.3

OBD:

  • Opel PSG16  Read (Bench Only), Write (OBD/Bench) + Auto-checksum   

New Open/Save file dialogue:

You can now save a text file with your clients data, ECU ID and communication info.

Virtual keyboard added for users of touch screen devices.

Posted on

MPPS Update V18.7.6.6

OBD:

  • Mazda 6 Denso R2AB   R/W/Cks
  • Mazda CX7 Denso R2AX  R/W/Cks
  • Mitsubishi Denso 4D56/4M41 R/W/Cks
  • Opel Astra Denso AX36 2010 on R/W/Cks
  • Mercedes Siemens Sim4LE Sim4SE R/W/Cks
  • Mercedes Sim4LKE R/W

Boot Mode:

  • Siemens Sim4LE, Sim4LKE, Sim4SE
  • Siemens DMEEMS2
  • Siemens MS42/MS43

Corrected:

  • Renault Sagem 3000 now default is CAN.
  • Updated Bosch ME7.6.2 reading should now be quicker.
Posted on

MPPS Update V18.6.7.4

  • Added Mazda 6 Denso RF7K/RF8K OBD R/W/C
  • Added force full flash to ME7 boot protocols – User can now choose to write full file or changes only.
  • Corrected a problem with Ford Siemens SID 204 (New file found)
  • Resolved a problem with the UDS protocol
  • Resolved a checksum problem with MED17 ecu’s
  • Resolved a checksum problem with BMW EDC16 ecu’s (Found new checksum)
Posted on

MPPS Update V18.6.4.14

  • Added Jaguar SID 204 R/W/C
  • Added Range Rover Sport SID 201/203/204 R/W/C
  • Added Jeep Patriot EDC16U31 R/W/C
  • Added VAG EDC17C46 OBD R/W/C (Only unlocked ECU’s)
  • Added Fiat ME7.6.3 W/C (Read can be done with the Multiboot plugin)
  • Updated Peugeot MED17 Checksum
  • Updated Fiat ME7.9.10 (Full or Data Write)
  • Updated Fiat MM8 Checksum
  • Updated Smart EDC16C31/32
  • Updated Ford EDC16C34
  • Updated some boot mode protocols (Will now write only what is different)
  • Updated VAG ME7 (You can now select the Memory)
  • On protocols with both CAN and KLine you can now select which you want to use.
Posted on

MPPS Tricore Boot Plugin

MPPS_tricore2This plugin adds support for tricore processor based ECU’s. Communication over boot mode is required when TPROT (Tuning Protection) is installed in the ECU, which prevents tuning from OBD.

 

The software automatically detects the processor and memory types, which simplifies the process for the user. Access to the available memories is then granted, the software allows you to make a full backup and also individually read / write the desired data.

Features:

  • Read / Write of all memories – Eeprom, Irom, Xrom (where possible)
  • Patch function for OBD Flashing of TPROT ECU’s (supports only VAG at the moment)
  • TPROT / DS check feature, for testing if TPROT is active without opening ECU.
  • Support for Bosch ECU’s upto TP12. (Password reading function for TP8+
  • Support for Bosch Service Mode to read password on ECU using TP12+
  • Support for Siemens ECU’s (currently only for ECU’s without password protection),
  • Unlocking of VAG Simos PCR and Simos 8 for OBD flashing
  • Checksum Correction supported for Bosch MEDC17 irom and eeprom.
  • Checksum Correction supported for Simos PCR, Simos 8 and SID305 irom.

 

Includes the software module, tricore interface, cable set, power supply and carry case.

Buy Now

Posted on

MPPS Info

The MPPS is a powerful programming tool. It offers like most other tools reading / writing operations and checksum support, however it also includes some additional features:

  • Excellent recovery functions.  In some cases MPPS can recover ECU’s which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).
  • Selectable full / partial reading and writing when the ECU allows this function.
  • Selectable reading / writing speed.
  • Writing “changes only” function for faster programming (when supported by the ECU).
  • Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.
  • Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.
  • Boot mode support for ECU’s with C167 and ST10 processors.
  • EEprom read/write functions for some ECU’s are included.
  • VAG MEDC17 TPROT level checking without opening the ECU.
  • Special file utility for creating OBD unlock files from VAS FRF containers.

This tool is available in different configurations, the comparison table below shows the differences:

Feature Slave Standalone Master Master Virtual Master
Read from vehicle
Write to vehicle
Reads open/encrypted files Encypted Open Open N/A
Can have slave units
Auto Checksum
Checksum button
Online updates Not Required

Supported ECU List

Some additional plugins are available for MPPS to extend the capabilities even further. You can find more detailed info by visiting the plugin pages:

     

Buy Now

Posted on

MPPS Update V18.4.1.11

MPPS:

  • Citroen/Peugeot Siemens SID 801/801A/804 flash Kline R/W/C OBD
  • Citroen/Peugeot Siemens SID 801/801A/804 eeprom Kline R/W
  • Citroen/Peugeot Delphi DCM 3.5 CAN R/W/C
  • Ford DCM 3.5 CAN R/W/C
  • Nissan Qashqai EDC16CP33 Kline R/W/C
  • Renault/Nisssan Nozzle codes standalone R/W
  • Fiat Marelli 5SF3 Kline R/W/C
  • Updated Fiat 6SF3 Kline to include the spansion flash

Tricore boot:

  • Added a full backup function (This cannot be modified but can be rewritten to the ecu by all tools). This is for safety.

Multiboot:

  • Added 5SF3 Flash R/W